Jukeblox - Setup, Controls, and Help

Start here

Quick Start

Four steps are all you need for normal use.

1Plug in Jukeblox and wait for the startup sound.
2Open your device’s Bluetooth settings and connect to JUKEBLOX_BT_XXXX.
3Play music from your phone, tablet, or computer.
4Insert a compatible disc to play its song. Remove the disc to return to Bluetooth.

Look for this name in Bluetooth settings JUKEBLOX_BT_XXXX

The final four characters “XXXX” are unique to your unit.

Power supply warning: Use only the included 5 V DC, 2 A power supply. An incorrect adapter can permanently damage Jukeblox.

Watch

Setup Video

A short walkthrough can show Bluetooth pairing, disc playback, and the Mode button.

Setup video coming soon

The written Quick Start above covers everything required to begin using Jukeblox.

Controls

Button Guide

The physical buttons control disc playback. Bluetooth volume is controlled from your connected device.

Disc Volume Up

Press or hold to increase the volume while a disc song is playing.

Disc Volume Down

Press or hold to decrease the volume while a disc song is playing.

Bluetooth Override

With a disc inserted, press once to hear Bluetooth. Press again to return to the disc song.

Volume memory: Jukeblox remembers your disc-volume setting after you adjust it. The + and − buttons do not change Bluetooth volume.

Playback behavior

How Disc Mode Works

Disc playback takes priority without disconnecting your Bluetooth device.

Insert a disc Jukeblox identifies the compatible disc and starts its song.

Disc takes priority Bluetooth remains connected, but phone audio is paused from the speaker.

Remove the disc The disc song stops and Bluetooth audio becomes available again.

The disc song repeats while the disc remains inserted.
Press Mode to use Bluetooth without removing the disc; press it again to return to disc playback.
Swapping directly from one compatible disc to another stops the old song and starts the replacement disc.
An unsupported or unreadable disc is ignored, so Bluetooth can continue playing.

Bluetooth stays paired: In normal disc mode, Jukeblox mutes Bluetooth audio rather than disconnecting your device.

Firmware compatibility

Supported Discs

The firmware can play every song listed below when used with its matching compatible Jukeblox disc.

21 songs

0113

02Cat

03Blocks

04Chirp

05Far

06Mall

07Mellohi

08Stal

09Strad

10Ward

1111

12Wait

13Pigstep

14Otherside

155

16Relic

17Creator

18Creator Music Box

19Precipice

20Tears

21Lava Chicken

Physical disc availability: This is a firmware compatibility list, not a live inventory list. Some matching physical discs may not yet be available when you view this page. Check the current product listing to see which discs are included or available for purchase.

Audio feedback

What the Sounds Mean

Startup cues tell you whether disc mode is ready. Bluetooth cues confirm connection status.

Normal startup sound A short Minecraft villager “huh” sound means the disc system passed its startup checks and Jukeblox is ready.

Error sound at startup A voice says “Disc system unavailable.” Disc playback will not be available while this error is present, but Bluetooth speaker mode should still start.

Bluetooth connected sound A Minecraft villager-style voice says “Bluetooth connected.”

Bluetooth disconnected sound A Minecraft villager-style voice says “Bluetooth disconnected.”

Bluetooth connection sounds may be skipped while a disc song is actively playing.

Help

Troubleshooting and FAQ

Try these steps before contacting support.

I cannot find Jukeblox in my Bluetooth settings.

Confirm that Jukeblox is powered on, then look for JUKEBLOX_BT_XXXX. Move your device closer and refresh the Bluetooth list.

If Jukeblox was paired before, it may reconnect automatically to a nearby device. Temporarily turn Bluetooth off on that device.
Turn Bluetooth off and back on on the device you are trying to pair.
Unplug Jukeblox, plug it back in, and wait for the startup sound before searching again.

Bluetooth says connected, but I do not hear audio.

Make sure JUKEBLOX_BT_XXXX is selected as the audio-output device.
Turn up the volume on your phone, tablet, or computer.
If a disc is inserted, remove it or press the Mode button to allow Bluetooth audio.
Pause and replay the audio, then disconnect and reconnect Bluetooth if needed.

My Mac is connected, but sound is still coming from the computer.

Open System Settings > Sound > Output and select JUKEBLOX_BT_XXXX. Then make sure the Mac’s output volume is turned up and replay the audio.

A disc is inserted, but its song is not playing.

Confirm it is a compatible Jukeblox disc from the supported list above.
Remove the disc, wait a moment, and insert it again.
Try another compatible disc to determine whether the issue is limited to one disc.
Restart Jukeblox. If you hear “Disc system unavailable” at startup, disc playback will not work while the error is present. Bluetooth should still work; contact support if the message returns after a restart.

Bluetooth audio stops when I insert a disc.

This is normal. A recognized disc automatically takes priority while Bluetooth stays connected. Remove the disc to return to Bluetooth, or press Mode to hear Bluetooth while leaving the disc inserted.

The + and − buttons are not changing the volume.

The physical volume buttons work only while a disc song is playing. During Bluetooth playback, use the volume controls on your connected phone, tablet, or computer.

The Mode button does not do anything.

The Mode button is active only when a compatible disc has been recognized. Insert a disc and wait for its song to begin, then press Mode to switch to Bluetooth. Press it again to return to the disc.

The audio sounds distorted or too loud.

For Bluetooth audio, lower the volume on the connected device. For disc audio, press the − button several times. Very high source or disc volume can cause clipping and distortion.

I heard “Disc system unavailable” when Jukeblox started.

The spoken message “Disc system unavailable” means Jukeblox detected a problem with the disc reader, music storage, or required track files. Disc playback will not be available while this error is present. Bluetooth speaker mode should still start after the message.

Restart once. If the message returns, contact support with your order number and a short video showing startup.

The disc song restarted from the beginning.

This is expected after the song reaches the end. Jukeblox repeats the song continuously while the disc remains inserted.

Still having trouble? Restart Jukeblox, reconnect Bluetooth, and try a second compatible disc before contacting support. These checks help identify whether the issue is related to the connected device, one disc, or the jukebox itself.

Product care

Care and Safety

Basic care helps protect the electronics, speaker, and disc reader.

Keep it dryUse indoors and keep Jukeblox away from liquids, damp areas, and condensation.

Avoid high heatDo not leave it in direct sunlight, near heaters, or inside a hot vehicle.

Use the proper power sourceUse the included or 1-Tek-approved power cable and adapter for your unit.

Handle discs gentlyDo not force a disc into position. Unplug Jukeblox before cleaning it with a soft, dry cloth.

1-Tek support

Contact Support

Include the details below so the problem can be diagnosed efficiently.

Get help from 1-Tek

Use the online support form to contact 1-Tek support. Include your order number, the device you were using, whether you heard the normal Minecraft villager “huh” or the “Disc system unavailable” message, and a short video when possible.

Open Support Form

The support form works in any browser and sends your message directly to 1-Tek support.

Order number
Phone, tablet, or computer model used for Bluetooth
Whether Bluetooth, disc playback, or both are affected
Photo or short video showing the problem